netadairLV1Online
Following: 1Followers: 0
Forums/ Powerline Adapters
2022-10-04 09:49:25
Re:Firmware TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.13.0.0020
Having lldp and "bridging mme" mentioned in the release notes, how would I query the lldp between the adapters, and would "bridging mme" feature be just a compatibility issue with multiple networks,...
0HELPFULS
Forums/ Powerline Adapters
2022-06-13 08:05:15
Re:Firmware TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.12.0.0061
The adapter loosing connection now after patching, after power cycle; so it seems TEIs are not given out on a rotary anymore (whatever the effect is). root@ap04:~# plcstat -t P/L NET TEI ------ MAC...
0HELPFULS
Forums/ Powerline Adapters
2022-06-13 07:58:17
Re:Firmware TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.12.0.0061
@PowerlineFW thanks again for the new firmware! It works partially better again on one particular remote adapter, however in another part of one of the PLC networks it behaves strange, mixing up...
0HELPFULS
Forums/ Powerline Adapters
2021-09-01 18:21:41
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.10.0.0032
@Shigella The WPA8630Pv2, just as the 8010 or 8030, just does not have enough free flash memory (2MB, minus running flash minus overhead) in the PLC part to flash the full firmware. plctool -f br-plc...
0HELPFULS
Forums/ Powerline Adapters
2021-03-23 08:24:25
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.10.0.0032
@zward The PIB files are device specific, that is why you must regard them as template, where the upgrade process reads out (at least MAC, NMK) parameters from the running pib, fills the template and...
0HELPFULS
Forums/ Powerline Adapters
2021-02-20 14:34:30
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.10.0.0032
@Ariek These are the same two adapters. It's just one symptom of these lockouts, before and after a manual reset. This particular symptom means: the station was joined to the network before,...
0HELPFULS