Wire to LED Panel that has 2 dim wires

Wire to LED Panel that has 2 dim wires
Wire to LED Panel that has 2 dim wires
2021-07-26 01:42:29 - last edited 2021-07-26 01:43:49
Model: HS220
Hardware Version: V7
Firmware Version:

Hi all, is it possible to wire this to a LED Panel that has 2 dim wire along with normal power wires? 

0
0
#1
Options
5 Reply
Re:Wire to LED Panel that has 2 dim wires
2021-07-26 20:27:51
What do you mean 2 dim wires?
0
0
#2
Options
Re:Wire to LED Panel that has 2 dim wires
2021-07-26 21:52:02

@BackupAddict Hello, most of the LED panels I'm look at have  a hot/ground/netual like normal, but to use the dimmer you have to use the 2 wires thaty are on the panel as well. 

 

Do you have any brands that will work that you know of? 

0
0
#3
Options
Re:Wire to LED Panel that has 2 dim wires
2021-07-26 22:08:19

@BackupAddict I think I understand what you're asking. You need triple strand wire to be able to use this. So you'll need a line (usually black), a load (usually red) along with a neutral (white) and ground (either bare copper or green usually). 
 

If you don't have the wiring in the box to support this, you won't be able to use it in that location. 

0
0
#4
Options
Re:Wire to LED Panel that has 2 dim wires
2021-07-26 22:17:38

@BackupAddict Ok, so nothing other a standard setup will work?

0
0
#5
Options
Re:Wire to LED Panel that has 2 dim wires
2021-07-26 22:36:33

 

BackupAddict wrote

@BackupAddict Ok, so nothing other a standard setup will work?

@BackupAddict I mean, if the wires aren't there to support what you're trying to do, you can't do it. 

0
0
#6
Options