Constant DHCP Allocations for TL-WPA8630
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
And this is the logs from my ER605.............thoughts? I mean the powerline is working but I am just curious about these entries every minute and a half.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Riley_S that is exactly what I ended up doing this moring (setting up a IP reservation and static IP on the satellite node). That cleaned up my logs.
I have my DHCP lease time on the Omada set to 1440 minutes so that is why I was wondering why this device kept renewing every minute and a half. A heartbeat of sorts makes sense.
Thanks for the reply.
-bp
- Copy Link
- Report Inappropriate Content
I assume that the IP address that it is assigning is the IP of the satellite node. To me this looks like the unis are communicating to make sure that they are alive and working. I do not have much knowledge of the Omada Interface, but I would check to see what the DHCP times are set at. Otherwise, you can set some sort of IP reservation and static IP so that the Powerline Adapters do not need an IP assigned to them at all
- Copy Link
- Report Inappropriate Content
@Riley_S that is exactly what I ended up doing this moring (setting up a IP reservation and static IP on the satellite node). That cleaned up my logs.
I have my DHCP lease time on the Omada set to 1440 minutes so that is why I was wondering why this device kept renewing every minute and a half. A heartbeat of sorts makes sense.
Thanks for the reply.
-bp
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 498
Replies: 2
Voters 0
No one has voted for it yet.