Home

Forums

Stories

Knowledge Base

Home Network Community > Range Extenders > WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

< Range Extenders

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

Aussie_Z

2024-05-28 20:28:03 - last edited 2024-06-14 16:43:37

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-30

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

2024-05-28 20:28:03 - last edited 2024-06-14 16:43:37

Model: RE715X

Hardware Version: V1

Firmware Version: 1.0.11 Build 20230721 rel 34344

I read this https://community.tp-link.com/us/home/forum/topic/203466 but I am hoping that there is a newer/better answer by now.

I installed an Archer AX10000 and an RE715X Extender in a mesh configuration to ensure that two "delicate" (wrt WiFi signal strength) devices get a "high-powered" WiFi signal. The "delicate devices" are connecting to the AX10000 (at 66 feet and 56% signal strength thru numerous walls) instead of the Extender (at 22 feet an 82% direct line-of-sight).

What can I do to (force?) connect the devices to the Extender so they receive a strong WiFi signal and remain stable?

1 Accepted Solution

terziyski

LV7

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

Posts: 6843

Helpful: 5017

Solutions: 1077

Stories: 7

Registered: 2013-10-12

Re:WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength-Solution

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

@Aussie_Z

There's no better answer than that you already saw.

You can lower AX10000 Advanced=>Wireless Settings=Ttransmit Power to Middle and check if there's any improvement.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

Posts: 6843

Helpful: 5017

Solutions: 1077

Stories: 7

Registered: 2013-10-12

Re:WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength-Solution

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

@Aussie_Z

There's no better answer than that you already saw.

You can lower AX10000 Advanced=>Wireless Settings=Ttransmit Power to Middle and check if there's any improvement.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

Information

Voters 0

Tags