Installing HS200-2 and issues with 2 way switches

Installing HS200-2 and issues with 2 way switches

Installing HS200-2 and issues with 2 way switches
Installing HS200-2 and issues with 2 way switches
2024-06-04 20:36:48
Model: Kasa HS200  
Hardware Version:
Firmware Version:

I installed a HS200-2 replacing my 2 switches on my wall. Each of the switches control individual lights. 

 

Switch (1 - Left) - Controls a ceiling light and works perfectly.

 

Switch (2 - Right) - Controls 3 cieling lights that are also controlled by another switch upstairs. Below is my connection

 

  • 1 Red (From the box) to Black (on the Kasa Switch)
  • 2 Blacks (From the box) to Black (on the Kasa Switch)
  • Ground (Bare wire from the box) to Green (on the Kasa Switch) 
  • White (From the box) to White (on the Kasa Switch) 

 

The Kasa Switch 2 worked perfectly after the setup. Then when I tried to turn off the upstair switch that also controls the same set of ceiling lights that the Kasa Switch (2) does then it didn't work.

 

Please suggest the changes I should make to fix this problem.  

  0      
  0      
#1
Options