DL110 lock battery status
I installed this lock 2 weeks ago. It gets used every day and is always connected to Wi-Fi. Yet the battery still shows 100% in the app. I don't see how this can be accurate.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I installed the same device one and a half weeks ago. Exactly the same issue you are experiencing. I've tried a factory reset but the battery still shows 100%. Have you had any luck solving this?
- Copy Link
- Report Inappropriate Content
The smart lock usually has a reserve battery capacity beyond the displayed percentage. When it shows 100%, there is still additional buffer power available, which is why the reading can stay at 100% for a long time, this is an expected behavior. Only after this reserve is depleted will the displayed level begin to decrease gradually.
For Tapo DL110, its battery life is up to one year in lab testing, and when operating in local mode, the battery can last even longer. *Actual battery life may vary due to device settings, usage, router specifications, and environmental factors.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi. I am going on 4 months and my lock still shows 100%. I have taken battery out for 15 minutes and replaced but it still shows 100. We use several times a day so impossible still at 100. TK Link support, what is the fix for this? Can't you release a software upgrade to fix this?
- Copy Link
- Report Inappropriate Content
@NYC-JM the battery is bad. They'll send you a new one if you open a case.
- Copy Link
- Report Inappropriate Content
For what it's worth it took many months for mine to finally show a decrease in battery. It is working fine now, showing the battery slowly going down.
I know it is frustrating, but my understanding is that the battery, hardware and software aren't calibrated very well by Tapo. It's almost as if the battery has been charged more than what the door lock understands to be 100 per cent.
Personally I would wait a few more months, but definitely take it back before the warranty expires if you are still having issues.
- Copy Link
- Report Inappropriate Content
the same happens to me. I installed a month and a half ago and still shows 100%
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1479
Replies: 7
Voters 0
No one has voted for it yet.