Smart Home CommunityDoor LocksDL100 rings doorbell when linked to D130
Door Locks

DL100 rings doorbell when linked to D130

12

DL100 rings doorbell when linked to D130

DL100 rings doorbell when linked to D130
DL100 rings doorbell when linked to D130
2026-02-10 03:31:43 - last edited a week ago

With the recent firmware update, I was able to integrate and link my DL100 door lock to the D130 doorbell. 

The weird issue I have been having is that whenever I lock the smart lock either manually or in the app. It will then ring the doorbell, the chime goes off and I get call notification to my phone. 

Obviously if I unlink the two devices, this issue does not happen. Any help would be greatly appreciated. 

  0      
0
#1
Options
1 Accepted Solution
Re:DL100 rings doorbell when linked to D130-Solution
a week ago - last edited a week ago

The issue reported in this thread has been identified and will be fixed in Tapo D130's future firmware.

 

Before the official release, a beta firmware can be provided to our community members to resolve the problem. If you would like to try it, follow the guidances below:

  • For users from the United States, send your request to forumsupport.usa@tp-link.com with:
    1. A brief summary of the product issue you encountered, along with your request for beta firmware. *You may also include a link to this community post for the support team’s reference.
    2. The Mac address of your Tapo D130.

 

  • For users from other countries or regions, send your request to me (@Wayne-TP) in the community via a private message, and include the information below:

[Forum 857384] + Mac address of your Tapo D130

 

 

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update firmware of Tapo smart devices
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
0
#9
Options
13 Reply
Re:DL100 rings doorbell when linked to D130
2026-02-11 11:21:17

  @Dilatedpeoples2 

 

To help assist and streamline the identification of the behavior, we recommend sending an email to forumsupport.usa@tp-link.com with the following information:


Subject: [Forum Escalation][ID 857384] DL100 rings doorbell when linked to D130

Forum Nickname: [User Provided]
Thread URL: https://community.tp-link.com/us/smart-home/forum/topic/857384
Product Info (Model, Hardware&Firmware Versions, Mac address, etc): [User Provided]
Description: [User Provided]
Any Other Relevant Information (Logs, Config Files, Images, etc.): [User Provided]

 

Once sent, a ticket will be created in our support system, and a team member will follow up to gather more information or troubleshoot the issue.
 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
0
#2
Options
Re:DL100 rings doorbell when linked to D130
2026-02-11 12:43:18
Thanks, I have sent the requested email.
  0  
0
#3
Options
Re:DL100 rings doorbell when linked to D130
2026-02-25 13:28:06

  @Dilatedpeoples2 

 

Did you ever receive a solution? My unit started doing that this morning... 

  0  
0
#4
Options
Re:DL100 rings doorbell when linked to D130
2026-02-25 13:30:31
I have been working with the engineering team. They got logs and have been able to replicate the issue in there test space. They are working on a fix now, but no timeframe for when.
  1  
1
#5
Options
Re:DL100 rings doorbell when linked to D130
2026-02-26 06:56:35

ExcitedViper202 wrote

  @Dilatedpeoples2 

 

Did you ever receive a solution? My unit started doing that this morning... 

  @ExcitedViper202  You can also refer to the suggestion I shared earlier and email our support team to follow up on the issue you’re experiencing.

 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
0
#6
Options
Re:DL100 rings doorbell when linked to D130
a week ago

It's been 3 months and this still happens. Dissapointing. 

  0  
0
#7
Options
Re:DL100 rings doorbell when linked to D130
a week ago - last edited a week ago

Zyph wrote

It's been 3 months and this still happens. Dissapointing. 

  @Zyph 

 

Which Tapo doorbell and door lock do you have? Are they also the DL100 and the D130?

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
0
#8
Options
Re:DL100 rings doorbell when linked to D130-Solution
a week ago - last edited a week ago

The issue reported in this thread has been identified and will be fixed in Tapo D130's future firmware.

 

Before the official release, a beta firmware can be provided to our community members to resolve the problem. If you would like to try it, follow the guidances below:

  • For users from the United States, send your request to forumsupport.usa@tp-link.com with:
    1. A brief summary of the product issue you encountered, along with your request for beta firmware. *You may also include a link to this community post for the support team’s reference.
    2. The Mac address of your Tapo D130.

 

  • For users from other countries or regions, send your request to me (@Wayne-TP) in the community via a private message, and include the information below:

[Forum 857384] + Mac address of your Tapo D130

 

 

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update firmware of Tapo smart devices
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
0
#9
Options
Re:DL100 rings doorbell when linked to D130
a week ago - last edited a week ago

Wayne-TP wrote

The issue reported in this thread has been identified and will be fixed in Tapo D130's future firmware.

 

Before the official release, a beta firmware can be provided to our community members to resolve the problem. If you would like to try it, follow the guidances below:

  • For users from the United States, send your request to forumsupport.usa@tp-link.com with:
    1. A brief summary of the product issue you encountered, along with your request for beta firmware. *You may also include a link to this community post for the support team’s reference.
    2. The Mac address of your Tapo D130.

 

  • For users from other countries or regions, send your request to me (@Wayne-TP) in the community via a private message, and include the information below:

[Forum 857384] + Mac address of your Tapo D130

 

 

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update firmware of Tapo smart devices
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.

 

@Zyph 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
0
#10
Options
Re:DL100 rings doorbell when linked to D130
a week ago - last edited a week ago

  @Wayne-TP Me and somebody else I know are having the same issue on the DL105, in Canada. What steps should we take to try and resolve for everyone, or will that firmware also work for us?

  0  
0
#11
Options
12

Information

Helpful: 0

Views: 582

Replies: 13