Lights won’t turn on. Previously flashing.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lights won’t turn on. Previously flashing.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Lights won’t turn on. Previously flashing.
Lights won’t turn on. Previously flashing.
2019-05-26 18:16:41
Model: HS200  
Hardware Version:
Firmware Version:

I installed a switch and at first the bulbs (LED) were flashing so I connected all neutral wires in the box together. Lughts no longer flash but wont turn on. Switch is connecting to wifi and it seems to be working. I can hear the click and the circle indicator goes on and off. 

 

Yes, white to white, Blacks to blacks, and green to ground. 

 

Any Help is appreciated. 

  0      
  0      
#1
Options
2 Reply
Re:Lights won’t turn on. Previously flashing.
2019-05-26 18:19:41
I did replace one led and no change
  0  
  0  
#2
Options
Re:Re:Lights won’t turn on. Previously flashing.
2019-06-05 22:04:11

@Karter 

 

Usually this is caused by the house wires only having 1 live wire in the wall and then the two live/load wires spliced together with this single wire.  For HS200 and HS220 the live and load must be wired seperately.  If they are wired together you will hear a click but there will be no operation of the lights.   

 

If this is not the case a picture of how it is wired will help.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 2222

Replies: 2

Related Articles