HS220 DIMMER, From the wall i have Ground, Neutral and LINE...ONLY.. No Load... how do i connect?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS220 DIMMER, From the wall i have Ground, Neutral and LINE...ONLY.. No Load... how do i connect?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS220 DIMMER, From the wall i have Ground, Neutral and LINE...ONLY.. No Load... how do i connect?
HS220 DIMMER, From the wall i have Ground, Neutral and LINE...ONLY.. No Load... how do i connect?
2020-03-17 03:11:56
Model: HS220  
Hardware Version:
Firmware Version:

From my wall, I have Ground, Neutral, and Line... but NO LOAD.

I connected White with white, and Green with copper, and Black with Line.

The Switch works but NO LIGHT. I have been trying to figure this out,

do i need to piggy tail this? Please Advice...  I would apppreciate it.

  0      
  0      
#1
Options
1 Reply
Re:HS220 DIMMER, From the wall i have Ground, Neutral and LINE...ONLY.. No Load... how do i connect?
2020-03-17 15:01:23

@atomicow 

 

The three wires you will need at the very least are the line, load, and neutral. It looks like you only have two of the wires needed. So currently you will not be able to install the smart switch on that outlet.

  0  
  0  
#2
Options