HS220 not working with two gang

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS220 not working with two gang

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS220 not working with two gang
HS220 not working with two gang
2020-06-29 02:39:00
Model: HS220  
Hardware Version:
Firmware Version:

Have a two gang switch at the bottom of stairs. One of the switches controls the recess lights over the stairway. Those same lights can be turned off with another switch at the top of stairs.

 

The other switch in the two gang controls two recess lights in the family room downstairs. I can't get the switch to work at all for the downstairs recess lights. The HS220 smart switch is powered but it will power in the two downstairs lights.
 

  0      
  0      
#1
Options
4 Reply
Re:HS220 not working with two gang
2020-06-30 20:44:02

@problem1985 

 

I think the issue is the outlets that you have are three-way switches which the HS220 does not support. You need to use the HS210.

  0  
  0  
#2
Options
Re:HS220 not working with two gang
2020-07-01 16:41:45

@Tony Okay. I'll try those and let you know how it works out.

  0  
  0  
#3
Options
Re:HS220 not working with two gang
2020-07-03 21:04:32

@Tony I installed two switches from the HS210 kit and neither light works. Please advise.

 

  0  
  0  
#4
Options
Re:HS220 not working with two gang
2020-07-04 18:55:30

@problem1985 

If the old switches had the white wire attached to the switch, then they are not the neutral.

The white and red are probable the travellers, black the common/load.

Unless you have white(neutral) in the box, you can not use smart switches.

 

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 1690

Replies: 4

Related Articles