Wifi on, but light doesn't turn on
I'm trying to install a TP-Link HS200 smart switch... The yellow wire was originally connected to the old switch and the orange wire wasn't connected to anything. If I connect the yellow wire to a black wire, the wifi doesn't turn on.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@B.Will Take the orange from the box and the black from the box and connect them to the black wire of the HS200.
Connect the yellow from the box to the other black of the HS200.
- Copy Link
- Report Inappropriate Content
@JayCA Did the old switch have 3 screws?
- Copy Link
- Report Inappropriate Content
@B.Will Here's a photo of the old switch. Black and yellow wires were connected to it
- Copy Link
- Report Inappropriate Content
@JayCA Join the black and yellow together, turn the breaker on and the light should be on.
If not then I don't know whats going on.
Was the orange wire protected with a wirenut?
- Copy Link
- Report Inappropriate Content
@B.Will Thanks - could you clarify if I should disconnect the orange wire and then join the yellow and black? The orange wire was not protected with a wire nut.
- Copy Link
- Report Inappropriate Content
@JayCA My guess is the orange wire was connected to the switch and fell off when you removed the switch.
The question would then be does the orange go with the yellow or does it go with the black?
- Copy Link
- Report Inappropriate Content
@B.Will Take the orange from the box and the black from the box and connect them to the black wire of the HS200.
Connect the yellow from the box to the other black of the HS200.
- Copy Link
- Report Inappropriate Content
@B.Will here's the wiring for another switch in another room for comparison
- Copy Link
- Report Inappropriate Content
@JayCA Most defiantly, Take the orange from the box and the black from the box and connect them to the black wire of the HS200.
Connect the yellow from the box to the other black of the HS200.
- Copy Link
- Report Inappropriate Content
@B.Will Thank you so much! Joining the orange and black with the black wire on the HS200 worked.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1701
Replies: 10
Voters 0
No one has voted for it yet.