Installation proble with Kasa H210 at one box and wiring at the other box

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Installation proble with Kasa H210 at one box and wiring at the other box

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Installation proble with Kasa H210 at one box and wiring at the other box
Installation proble with Kasa H210 at one box and wiring at the other box
2022-10-14 14:41:49
Model: HS210  
Hardware Version:
Firmware Version:

Hi, new to forum.  I an having a problem getting my Kasa switches connected and operating a 3 way circuit.  I have the first j-box with the 14/2 coming in from the electrical panel.  I connected the black (hot) wire to the black screw on the Kasa 3 way switch.  Going out from the switch is a 14/3 to the first light which is in the laundry room.  I connected the ground to grounds, the white neutrals together, the black from Kasa to the black from the 14/3 to the light and the white from Kasa to the red from the 14/3 to the light.  Here's where the problem I have begins.  Prior to changing the switches, there was a regular three way switch at the first j-box (which now is replaced by the HS210) and in the other box was a two way switch.  In this second j-box, which is after light number one in the laundry room;  there are two 14/2 cables.  One coming from light number one and the second going to two more ceiling lights in the garage.  First issue is I don't think I can use the other HS210 in this location due to it being 14/2.  If I can, how do I connect the wiring?  Secondly, if I can't use another HS210 at that j-box can I use a HS200 and how would I wire that one?  I tried connecting the HS200 by going one black from 14/2 from light number one to one black on HS200, then the other black from HS200 to the other black from the 14/2 going to the garage lights.  The grounds are all together and the neutrals are together.  I have power to j-box two, but connecting the switch in different combos I get nothing. I'm at a loss.  Would appreciate any help.  Thanks

  0      
  0      
#1
Options