Gleep52LV1Online
Following: 0Followers: 0
Forums/ Tapo Smart Cameras
2025-03-09 21:50:42
Re:How can I manually adjust the focus to the C120 camera? Disassembly required I know...
@ceka nope - that big white one is your wifi. Without that, you don't have wifi at all. :(
0HELPFULS
Forums/ Tapo Smart Cameras
2025-03-09 19:18:32
Re:How can I manually adjust the focus to the C120 camera? Disassembly required I know...
@ceka I'm guessing there is probably some kind of error coding in the camera that is checking or waiting for the led and since it's physically removed now, it fails and therefore never proceeds?...
0HELPFULS
Forums/ Tapo Smart Cameras
2025-02-27 02:13:47
Re:How can I manually adjust the focus to the C120 camera? Disassembly required I know...
@ceka aren't you able to disable it from within the app? Any wires pinched or shorted when you put it back together?
0HELPFULS
Forums/ Tapo Smart Cameras
2025-02-27 02:12:53
Re:How can I manually adjust the focus to the C120 camera? Disassembly required I know...
I just used a silver spudger that I use on phones and tablets - it's very thin but sturdy and let me pop off the transparent plastic insides from the plastic "teeth" on the white exterior round part....
1HELPFULS
Forums/ Tapo Smart Cameras
2024-11-10 20:09:02
Re:How can I manually adjust the focus to the C120 camera? Disassembly required I know...
@DrDealgood in fact I did - and it wasn't hard at all. The hardest part was the focus after removing the glue - turns out, it's VERY sensitive to even the tiniest amount of rotation of the lens would...
0HELPFULS
Forums/ Tapo Smart Cameras
2024-09-12 03:52:46
How can I manually adjust the focus to the C120 camera? Disassembly required I know...
I am wanting ot use this camera for monitoring 3D printers - but the entire view is far out of focus when close to the print bed of the printers. Are there any tear down instructions available to...
0HELPFULS