Forums/
Tapo Smart Cameras
2025-08-05 17:16:45
Also it is a new build modern house, around 10 years old so I would be surprised if the wiring was not parallel.
0HELPFULS
Forums/
Tapo Smart Cameras
2025-08-05 17:08:53
Thanks that is super helpful. Very grateful for the information/education. I was certainly concerned about pressure on the bell disrupting the connections. So I triple checked the connections points...
0HELPFULS
Forums/
Tapo Smart Cameras
2025-08-05 16:45:17
@Jamval Interesting points and I tend to agree. I wonder if the scenario you and I are both identically experiencing is relatively unusual and so Tapo are not aware of it and perhaps it isnt even...
0HELPFULS
Forums/
Tapo Smart Cameras
2025-08-04 17:51:55
@mjbarnard Unfortunately the problem has returned, despite replacing the transformer. The bell switches to battery and then back again following every press. Beginning to think it is a firmware issue.
0HELPFULS
Forums/
Tapo Smart Cameras
2025-08-02 13:48:30
@mjbarnard
0HELPFULS
Forums/
Tapo Smart Cameras
2025-08-02 13:44:47
@Wayne-TP I installed the Vemer TMC 30/24 and it works. FIrst of all I used 24V 30VA, but the doorbell made a very strange sound. I measured the Voltage and again it was 28V output not 24. It seems...
0HELPFULS