Forums/
Kasa Smart Plugs
2021-02-18 19:32:34
@Philippe1234 Is the KP200 connected to a network that has multiple network names that are the same? For example: Router 2.4G: mywifi Router 5G: mywifi If so, try and make it so that the plug is...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-02-18 18:57:08
@Mofritz Here is the LED pattern: Blinking Amber and Green: App-Config mode initiated. Quick Blinking Green: Connecting to the network. Solid Green: Connected to the network. Quick Blinking Amber:...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-02-18 18:53:41
@Concrete The app will switch depending on where you are connected. If you are on the same Wi-Fi network the app will connect to the device locally. When the device is set up it will automatically...
0HELPFULS
Forums/
Kasa Accessories
2021-02-18 16:40:25
@Prince55 If you have a router with a 2.4G and 5G with both being named the same that may cause an issue. You could try temporarily disable the 5G Wi-Fi, set up the plug with the 2.4G then enable the...
0HELPFULS
Forums/
Kasa Smart Switches
2021-02-18 16:36:54
@Mbenham What should work is smart actions: https://www.tp-link.com/us/support/faq/2567/ You would create a rule where when one turns on so would the other. You can make another rule for the reverse.
0HELPFULS
Forums/
Wi-Fi Routers
2021-02-18 16:20:28
@Disabling To disable AP Isolation, log into the router and go to Advanced > Wireless > Advanced Settings. If your laptop is asking for a network pin, see if you can switch to enter a network...
0HELPFULS