Forums/
Kasa Smart Plugs
2021-01-18 19:01:44
@QuantumG I was able to get this working by using SmartThings. Set up SmartThings with our Kasa app shown here: https://www.tp-link.com/us/support/faq/2556/ You then need to "SmartApps" which has the...
0HELPFULS
Forums/
Kasa Smart Switches
2021-01-18 17:18:54
@KnowOne I think you will need to create a smart action so when the HS200 turns on, the other two plugs will turn on. Here is a FAQ that talks about what smart actions can control:...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-01-18 17:17:05
@Meng_hs The smart plugs should keep the schedule and time settings internally when configured. How long is the plug off before you plug it back in? Also, what is the firmware and hardware version of...
0HELPFULS
Forums/
Kasa Smart Switches
2021-01-18 17:13:15
@Blguy17 The two things I would try before reaching out to support would be to factory default the switch by holding the small right button for 15 seconds. While that is rebooting, enable the guest...
0HELPFULS
Forums/
Powerline Adapters
2021-01-18 16:39:03
Windows has since dropped support for flash so if you try to run the tpPLC app you will be met with this screen: We have an updated utility that no longer relies on flash. You can grab that here:...
0HELPFULS
Forums/
Deco
2021-01-16 00:04:24
@OKeefe The mesh features still work in AP Mode so your device will roam. The Deco utilizes the 802.11 k/v/r protocols which gives the ability to roam. If your device supports those protocols then it...
0HELPFULS