TonyOnline
Following: 0Followers: 54
Forums/ Kasa Smart Switches
2020-11-20 22:23:23
Re:HS210 Switch Requires Two Cycles in App to power on
@jwigs22 It's because you are splitting the smart switches. If you install the smart switch on the opposite side of where the power comes into the 3 way you get the issues you describe for the first...
0HELPFULS
Forums/ Kasa Smart Plugs
2020-11-20 22:20:09
Re:Behavior after Power Failure - Smart Plugs (Multiple Models)
@DrJB The last state of the plug is what it should start up as. So if the plug is on, and there is a power outage, it will return to the on state, and vice versa. I've seen that for the HS105, but if...
0HELPFULS
Forums/ Range Extenders
2020-11-20 16:51:18
Re:"underlines" in password
@Maounde I'm not sure about underlines, usually the local account password creation mentions letters, numbers, and symbols so I would probably ignore the underline. Now when you create a wireless...
0HELPFULS
Forums/ Kasa Smart Bulbs
2020-11-20 16:39:52
Re:Smart bulb won't connect
@Thrustershaft Do a factory reset on it by turning off the light switch to it off and on five times. After the fifth time, it should blink three times indicating the reset worked. At that time look...
0HELPFULS
Forums/ Access Points
2020-11-20 16:37:17
Re:Setup accesspoint
@robertgodwin Use another wireless device to see if the issue remains. If so, do a factory reset on the router to see if the default wireless network comes up. If the issue remains, look at the...
0HELPFULS
Forums/ Feature Request
2020-11-20 16:24:17
Re:wi-fi extenders and ring doorbell3
@ilibili Where ever you have the RE450 plugged in, the circle LED should be blue, and the 2.4G and 5G will be lit indicating it is connected to the router's network. If your router is a dual-band,...
0HELPFULS
1242243244...