Forums/
Deco
2021-03-23 22:16:46
@ducktech That should not have been needed, but odd how that forced it. By default WPA2-PSK (TKIP/AES) should have been selected for the main network.
0HELPFULS
Forums/
Kasa Smart Plugs
2021-03-23 22:01:50
@Rushedblue Enable your guest network and only have the 2.4G enabled, you don't need local access to the plug where you will control it "remotely".
0HELPFULS
Forums/
Kasa Smart Switches
2021-03-23 21:56:44
@Bethel.8009 Instances where the switch was installed at the load end were usually because that was where the convenient switch was located or the switch that had the most accessibility or someone...
0HELPFULS
Forums/
Deco
2021-03-23 21:16:12
@The-Dark-Knight I'm not sure how you connected your computer, but if you wired your computer to the Deco, steal the Ethernet cable that goes to the main Deco, and test that speed to see if it is...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-03-23 20:54:02
@erl829 Schedules that are set in the smart device are saved internally so even if your network went down it should have still turned off. If the plug only had one instance of that happening, it...
0HELPFULS