Forums/
Wi-Fi Routers
2020-09-18 21:53:10
@radim Smart Connect interogates the device to determine where to connect it to, you have no control. It will also do Load Leveling it seems, keep the same number of devices on each SSID/Band. It...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-18 21:38:51
@marchello If you don't have a good cable (CAT6 preferred over CAT5e) or the cable is too long, you can't get 1Gbps. First thing to look at. If you do have a good cable, try a different port, still...
1HELPFULS
Forums/
Wi-Fi Routers
2020-09-16 20:23:30
@Tony By the way, if you look above at my 2 IPV6-TEST captures you'll see the HOSTNAME on the one with the rating of 18/20 does have the IP Address handed out from Spectrum, but the 17/20 didn't, it...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-16 20:20:06
@Tony Adam confirmed that in an e-mail. Funny, for IPv4 the F/W settings allow it, but it doesn't work for IPv6? We missed connection somehow this morning. Suspect the time was his time, not mine?...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-14 13:42:40
@Tony Thanks, I was contacted today by Adam from Support. Wants to do a TeamViewer session with me, not a problem. However, in his e-mail to me was this: ================= About the ICMPV6 filter,...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-12 11:48:16
@sdwr98 I'd check the settings on both routers and compare when wireless. Should look about the same I'd think? Here is what my iPad looks like: Compare on your router to other devices that connect...
0HELPFULS