Forums/
Kasa Smart Plugs
Yesterday
@Teeny23 To clarify, SENSE is not an officially supported third‑party platform by Kasa. We advise against using unofficial integrations due to potential security and stability issues, and official...
0HELPFULS
Forums/
Tapo Smart Lights
Yesterday
@Clayman Set the automation's effective time from sunset to sunrise: When camera detects movements, Then: 1. Turn on light bulb and set to 100% brightness (Turn on and custom lighting) 2. Delay 15...
0HELPFULS
Forums/
Tapo Smart Plugs
Saturday
@marksjc The Timer function only takes effect once after you manually activate it, and supports either an On or Off command. The Auto‑off Timer, by contrast, remains active continuously once enabled:...
0HELPFULS
Forums/
Tapo Smart Sensors
a week ago
@bcmain25 I haven’t received similar feedback before. I recommend monitoring your sensors more closely over the next few days or weeks. If the same issue happens again, contact our support team for...
0HELPFULS
Forums/
Kasa Smart Plugs
a week ago
@tplas HS300's SYS LED blinks orange during the reset process, when it turns to blinking red and orange, it is ready for setup. The control button of any outlet can be used to reset the smart strip,...
0HELPFULS
Forums/
Kasa Smart Switches
a week ago
@Bski A comparative test can help pinpoint the issue. 1. Test the switch elsewhere: Install the same switch in a different electrical box and check whether it powers on successfully. 2. Test another...
0HELPFULS