Solution Powerline Extender Acting as the DHCP server
This Article Applies to:
TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc.
Problem Description/ Phenomenon:
What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Makes Network Configuration Simple.
Some users may find that after the power outage or router’s rebooting, even after router’s internet is back and up running, client devices still get IP address from powerline extender, and cannot connect to the internet.
Note: if router loses internet and then goes back afterwards, powerline extender will do a scan automatically, if it detects another DHCP Server is running, it will disable its own automatically (when powerline units remain paired), and the devices will get IP address from main router then access the internet through that.
Troubleshooting Suggestions:
1. Double check if the main router’s internet is actually back ON and working fine.
To confirm this, wire a computer or laptop to another LAN port of the router using an Ethernet cable, leave the main powerline adapter connected to the LAN port of the router as well, check if you can access the internet successfully on the computer or laptop. If yes, that means the router's DHCP server is up and running; If not, you will need to check what's wrong with the router after the reboot or power outage.
2. Make sure the powerline adapter and extender are still paired (house LEDs are ON), show us the IP address on the clients devices. Compare that when the internet is good and when it is not.
How to check the IP address on a computer: https://www.tp-link.com/support/faq/669/.
If your model is not listed or the issue persists, please report back with the information below to help locate the issue.
Or send a support email to TP-Link technical support with title ‘[Forum ID 265692] Powerline Extender Acting as the DHCP server’ to get further assistance:
1. How did you find out powerline device's DHCP server does not work properly? Did you often reboot main router or is there often power outage in your house?
2. Does router’s internet work fine at that moment?
3. LED status on both powerline units.
4. Brand and Model of router, the network topology, for example:
ISP modem --- Router Archer C7 --- PA8010 .... <powerline> ...WPA8630P --- Asus laptop model X.
5. Model & OS of devices that connected to wireless powerline unit.
6. Model number & firmware and hardware version of your powerline KIT, update the firmware if it is not the latest version:
How to update the firmware of the powerline adapter using the tpPLC Utility: https://www.tp-link.com/support/faq/1091/
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Hexomedia Thank you for your feedback, if the phenomenon on your devices is the same as described as Page 1 of this thread, you should give a try on the existing beta.
That does not permanently turn DHCP, but it may do some help after setting up a static IP on the wireless powerline unit if smart DHCP is the one to be blamed.
- Copy Link
- Report Inappropriate Content
rather stupidly I actually bought a TP-Link AV1300 pair, a TL-8010p and a TL-8030p to replace the BT mini connectors..... the problem is that the WPA8630p ... AND even the newer WPA8631p devices are dud and exhibit the same stupid behaviour. So Thanks to TP-Links indifference and lack of care I have wasted a lot of cash on garbage at present and TP-Link will no doubt never actually fix the firmware thinking they are so large they can afford to ignore the bad impact as they have their cash and couldn't care less about the customers... this thread on firmware is showing that.
- Copy Link
- Report Inappropriate Content
Solla-topee wrote
@Hexomedia Thank you for your feedback, if the phenomenon on your devices is the same as described as Page 1 of this thread, you should give a try on the existing beta.
That does not permanently turn DHCP, but it may do some help after setting up a static IP on the wireless powerline unit if smart DHCP is the one to be blamed.
WHY don't you just release firmware that allows people to turn off "smart DHCP"?
Your "smart DHCP" is not smart, as it is disturbing our networks. The solution could be so simple: a simple check box ("turn off DHCP").
- Copy Link
- Report Inappropriate Content
I'd be happy if they just issued firmware that binned the whole DHCP stuff completely... the old AV600 wifi stuff worked well but tje new stuff is A grade junk.
- Copy Link
- Report Inappropriate Content
@Solla-topee I have a WPA8630P but is hardware Version: V1, is there a beta firmware for this model to turn off the smart DHCP, or does the v1 not contain the DHCP feature?
- Copy Link
- Report Inappropriate Content
Hi @Andy_W thank you for asking, some models are listed on page one of this thread, if that start with V2, V3, that means previous version does not use has a smart DHCP.
TL-WPA8630(P) V1 does not have a smart DHCP, if it does not work stable, you may start a new thread here with detailed description including the House Led status etc.
- Copy Link
- Report Inappropriate Content
Hey everyone,
We released the new beta for model TL-WPA4220 V5 (US), and TL-WPA7617 V1 (EU)
The new beta allows turning off Smart DHCP completely by manually setting up a static IP.( power off PLC does not affect existing static IP =DHCP off settings)
https://community.tp-link.com/en/home/forum/topic/265692?page=1
If you owe the above models, please give it a try and let us know if it helps with the concern, phenomena described on page1
For other models, country version, hardware versions, the estimated date is not confirmed, please keep an eye on the update on this thread, I will let you know for anything new.
- Copy Link
- Report Inappropriate Content
So where are TP-Link then on getting a fix for the DHCP so it can be switched OFF and the device act as a normal WiFi and ethernet powerline extender?
Looking on the actual device support pages shows NOTHING just the original Firmware and no mention of the the problems that people are getting or of the Beta Firmware even.
- Copy Link
- Report Inappropriate Content
Hello @PC_60 TL-WPA8630P or TL-WPA8631P new beta firmware has not released yet. Some old beta firmware are listed on Page 1 of the thread here. If the 'cause' is smart DHCP, the old beta should also help improve performance until your power off the powerline device. To better assist with your concern, I created a support email for you to confirm some case details and escalate your case.
- Copy Link
- Report Inappropriate Content
Solla-topee wrote
Hey everyone,
We released the new beta for model TL-WPA4220 V5 (US), and TL-WPA7617 V1 (EU)
The new beta allows turning off Smart DHCP completely by manually setting up a static IP.( power off PLC does not affect existing static IP =DHCP off settings)
https://community.tp-link.com/en/home/forum/topic/265692?page=1
If you owe the above models, please give it a try and let us know if it helps with the concern, phenomena described on page1
For other models, country version, hardware versions, the estimated date is not confirmed, please keep an eye on the update on this thread, I will let you know for anything new.
@Solla-topee I hope there's a TL-WPA4220 V5 EU build really soon, I'm coming week at a location with this HW and could really use the fix as they routinely unplug the devices, which enables smart DHCP again. Pretty please ;)
thanks
EDIT: some feedback from running 1.0.1 Build 210209 Rel.62933n (6985)
1) despite set as static IP, they still request an IP from DHCP
2) the DHCP server has a lease set for 23 hours but the WPA4220 ask an address every 30 seconds (this is with static IP set)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 49616
Replies: 200