Not sure where the problem is, but the Omada interface is not allowing me to reserve a fixed IP address on a client in subnet x.x.10.x, instead saying that it must be in x.x.0.x.
However, this does not match the LAN I've created, nor does it match the very dynamic IP that was already given to it.
Switch: TL-SG2218 v1.0
I have created a LAN (titled "Home"), which distributes addresses in the 192.168.10.x subnet. This works fine. And the client in question gets an appropriate DHCP address of 192.168.10.97
If I navigate to that client , and check the "Use Fixed IP Address", the interface is stating that it must be in the 192.168.0.x range, which is not possible.