How to set up local and public IP using vlan on the TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up local and public IP using vlan on the TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up local and public IP using vlan on the TL-SG108E
How to set up local and public IP using vlan on the TL-SG108E
2023-06-29 11:45:17 - last edited 2023-11-10 03:46:38
Model: TL-SG108E  
Hardware Version: V6
Firmware Version: TL-SG108E(UN) 6.0_1.0.0 Build 20230218 Rel.50633_up

Hi, I need help with vlan setup. I have two cables stretched from the provider on one cable are only local addresses and on the other cable are public addresses. 
I would like to use ports 1-4 for local addresses and 5-8 for public addresses. 
With the understanding that ports 1 and 5 are the uplink for the categories. 
I also need to avoid creating a loop between public and local addresses. 

Can someone please help me how to set it correctly what should be Target and untarget and then also PVID?

Thank you very much for your help

Have a nice day 

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:How to set up local and public IP using vlan on the TL-SG108E
2023-06-29 14:04:57 - last edited 2023-11-10 03:46:25

  @Zdenek_Blaha 

 

Fairly Easy... On the SG108, create VLAN (whatever number) on Port 5.

 

Access Port 6 and 8 to VLAN (whatever number you used above)

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options