@David-TP 

Hi, David-san.

Thank you very much for your reply.

 

> Can you share a link of the feedback

 

Since there is no official TP-LINK community forum in Japanese, we were discussing on a product review site's(kakaku com) message board.

Three people have reported issues with the iPhone 16 Pro series. 

I apologize, but I was unable to share the message board URL.

I received an error message stating: "Content or title contains illegal external links."

 

> latest firmware for Deco BE85_V2latest firmware for Deco BE85_V2

 

I tried updating the firmware, but it was already on the latest version.

The latest firmware for the BE85 model intended for Japan is "1.0.15 Build 20240123 Rel. 70835".

The firmware version for Japan appears to be significantly behind the versions available in other countries.

 

> any LED changes

 

Yes, I have noticed changes in the LED during the disconnection.

The pattern is as follows:

1. The LED is green during normal operation.
2. When connect iphone 16 pro max by MLO then all WiFi connections are lost, the LED turns yellow-green. (no blinking)
3. After about 2 minutes, the LED returns to green, and the WiFi connection is restored.

 

In addition to the previous information, there's an update:

Not only does the WiFi disconnect, but the wired Ethernet connection is also cut off.

 

I will describe the steps to reproduce the issue:

1. Enable MLO on the BE85 model intended for the Japanese market.
2. Connect to the BE85's MLO SSID using an iPhone 16 Pro (or Pro Max) intended for the Japanese market.
3. A few seconds after, the issue occurs. (7 out of 10 times)

 

And, I have attached system logs of the BE85 captured immediately after reconnection.

The time zone is JST.

09/25/2024 9:13:30 PM (Connection established between BE85 and iPhone 16 pro max)
09/25/2024 9:16:54 PM (Log captured after reconnection)

  @David-TP 

Thank you for your response.

 

In my personal opinion, I believe that the crash bug fix for MLO included in version 1.0.18 might be related to the current issue we're experiencing.

 

However, since the latest firmware for Japan is still at version 1.0.15, I think this is why we're seeing some users encountering this problem specifically in Japan.

 

I'm really hoping the Japanese team can roll out that firmware update soon.

You see, I got the BE85 because I was looking forward to using the WiFi 7 features, including MLO.

So I'm pretty keen on getting this sorted out.

 

Thank you very much.