Failover question

Failover question
Failover question
2013-11-08 00:18:26
Region : UnitedStates

Model : TL-ER6120

Hardware Version : V1

Firmware Version : 1.0.5 Build 20130314 Rel.56468

ISP :


I have a question/concern about WAN fail-over. It seems that if I unplug or power off a modem that is attached to a WAN port, the failover works, however if the modem looses connectivity, but its LAN interface that is connected to the Router's WAN port is still up, the router does not consider this a fail (as the gateway is still up).

Why do we not have options to set an outside IP address beyond the gateway to check for WAN failures?
0
0
#1
Options
1 Reply
Re:Failover question
2013-12-04 11:32:31
you can turn on the online detection in Maintenance -->Diagnostic, hope it will work.
0
0
#2
Options