VR600 AC2100 cant get to work on fttp connection!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
I previously used this router on my phone line connection setup at my own house without issues.
I have since moved to my partners address and cannot get it set up! I have tried so many things with no luck.
She has an FTTP connection through vodafone.
I have plugged the ethernet into the correct port (LAN 4/ WAN) which is connected to the ONT
Entered the correct PPPoE username and password provided by Vodafone
Changed it to wireless router mode
Entered the VLAN ID provided by Vodafone (901) event tried 101 which other people have had success with.
I've tried hard resetting the router and this hasnt helped.
Vodafone forums closed last month so will have no luck there either
Many thanks,
Hi@Uk101,
Thank you for contacting our community.
It is recommended that you can hard reset the modem firstly: Press and hold down for 8 seconds to reset the modem router into factory default settings.
For VLAN ID, please try 101 or not required.
Hi@Uk101,
Thank you for contacting our community.
It is recommended that you can hard reset the modem firstly: Press and hold down for 8 seconds to reset the modem router into factory default settings.
For VLAN ID, please try 101 or not required.