Inter VLAN issue
Hi There
I have concern about the connection between VLANs
I have a gateway (ER604) and a switch (SG2210P) contolled by Omada Software as below
I have two VLANs
Default vlan: 192.168.1.0/24 connected to PC1 (Omada controller) (PC1 IP: 192.168.1.5)
VLAN 200: 192.168.200.0/24 connected to a another PC (PC2 IP: 192.168.200.2)
I changed the switch's ports to the corresponding VLAN profile as below
Two devices have access to the internet
However, I can't ping between them
from PC1, I can ping to the VLAN subnet (192.168.200.1) but once i ping to PC2 I get (Request timed out.)
I even tried to add a "permit" role from ACL to allow the connection but no luck
Apreciate your support for the way to allow the connection between them
Oh, it's right !!!!
I was thinking of routing methods, (routing on a stick) and make things more complex
It's pinging now
Really appreciate your response 
C:\Users\LAPTOP SHOP>ping 192.168.200.2
Pinging 192.168.200.2 with 32 bytes of data:
Reply from 192.168.200.2: bytes=32 time=2ms TTL=127
Reply from 192.168.200.2: bytes=32 time=2ms TTL=127
Reply from 192.168.200.2: bytes=32 time=2ms TTL=127
Reply from 192.168.200.2: bytes=32 time=2ms TTL=127
Ping statistics for 192.168.200.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 2ms, Average = 2ms
Best Regards