Orange led light flashing. I cannot reset or power off
I dont know firmware or hardware versions
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Tapo C425's LED indicator doesn't have a 'blinking orange' state. Can you double-check the color? *When the camera is ready for configuration, the LED will blink red and green.
How do you reset the camera? Please make sure to do it correctly: use a pin to press and hold the Reset button for at least 5 seconds. When the camera is resetting, its LED will blink red quickly.
If the camera's LED shows no response during or after the reset, then this device is likely bricked. In this case, you may want to contact the support team to check for the warranty. Contact Technical Support
- Copy Link
- Report Inappropriate Content
Tapo C425's LED indicator doesn't have a 'blinking orange' state. Can you double-check the color? *When the camera is ready for configuration, the LED will blink red and green.
How do you reset the camera? Please make sure to do it correctly: use a pin to press and hold the Reset button for at least 5 seconds. When the camera is resetting, its LED will blink red quickly.
If the camera's LED shows no response during or after the reset, then this device is likely bricked. In this case, you may want to contact the support team to check for the warranty. Contact Technical Support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 110
Replies: 1
Voters 0
No one has voted for it yet.