Band Steering on EAP245 V3 with OC200 Omada controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Band Steering on EAP245 V3 with OC200 Omada controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Band Steering on EAP245 V3 with OC200 Omada controller
Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-02 14:14:46
Tags: #VLAN & Multi-Networks #Installation #OC200 Omada controller
Model: EAP245  
Hardware Version: V3
Firmware Version: 5.0.6

Hi All,

 

I have set-up an OC200 with ER605 Router connecting two EAP245 v3.

I have setup three wirless SSID's all allowing 2.4, 5.0 and 6.0 Ghz access.

 

How can i set-up the Wireless network in such way that for modern devices it will give 5.0Ghz band priority.

When i test with my mobile phone it connects with 2.4 while it can connect with 5.0.

 

When i disbale the 2.4, obviosly the phone connects on the 5.0 automatically.

 

The EAP are connected via UTP cable on a managed switch TL-SG108E.

 

Thanks for any help.

 

NoebiWan

  0      
  0      
#1
Options
6 Reply
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-02 15:30:30

  @NoebiWan 

 

Hey

 

Have you enabled Band Steering and Roaming under site / advanced features?     Also bear in mind that some devices will connect to 2.4 first, before band steering to the 5ghz band.

 

 

 

  0  
  0  
#2
Options
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-03 06:53:16

  @NoebiWan 

Try this:

1. Forget the network on your phone(or other wireless devices);

2. On the Controller, disable 5Ghz for the SSID;

3. Connect the SSID on the phone(so it will be connected to 5Ghz;

4. Enable 2.4G on the Controller.

  1  
  1  
#3
Options
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-07 08:02:45

  @Philbert 

 

Apologies for my delayd reply - (i was sick) THis morning i have tried to search for the settings your are referring to

I do not have these settings under "Site settings".

 

I have an OC200 controller with the latest firmware.

 

Maybe you can send me the correct path to the setting (it could be that i overlook something...)

 

Regards,

Noebiwan

  0  
  0  
#4
Options
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-07 08:04:17

  @Somnus Thnaks for you reply.
 

Your solutions works. But the solution is not sustainabl, because everytime a new phone connects to the network it will still offer the 2.4Ghz as first.

 

Best regards,

Noebiwan

  0  
  0  
#5
Options
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-07 21:27:35

  @NoebiWan 

 

Hey

 

Its deffinately under ADMIN > SITE  but you need to click / select advanced features to see it.  

 

If you havent done that yet, then likely you wont have bandsteering enabled so that might be your issue :)

 

  3  
  3  
#6
Options
Re:Band Steering on EAP245 V3 with OC200 Omada controller
2023-02-08 08:59:51

  @Philbert - i found it !

 

I overlooked the "advanced features" thickbox.
Will configure it and check how it will perform.

Many thanks for your support.

 

Regards,

Noebiwan

  3  
  3  
#7
Options

Information

Helpful: 0

Views: 1136

Replies: 6

Tags

Related Articles