TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello all,
Question about the new switch
We use a Hirschmann L3 swictch to set all the networks and VLAN.
Now for a small part we need 10GB connectivity.
So we have setup 2 TL-SX3206HPP connected with 10GBSFP+ between the building.
To manage them we use a special managemt VLAN (102) from where all the switches and routers are managed.
1 port form 1 TL-SX3206HPP is connected to the "main switch".
When my laptop is in the iprange and connected to the managemnt VLAN is can connect. But in the office not.
The reason for this is that i can not set the gateway IP in the TL-SX3206HPP The gateway IP 10.11.102.11 can not be set
We managed to set the Switch IP to VLan 102 But where is the gateway entry ?????
Where is the gateway option ??
Thx for the replay
We have a central Layer 3 who does the routing from all v-lan
So we can acces all switches from lets say the office network.
The gateway for our managment lan is 10.11.101.11
All other switches have something like this below, thisswitch is reachable from the office network in anaorher vlan
This works Perfect.