Use dualWANs on distincive LAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello everyone,
I've had a look at the forum and the interent but I cannot find the awnser I need. Hopefully someone can clear this for me.
The situation is as following. At the moment I have one TL-R605 router. The WAN port is occupied by the cable coming directly from the ISP. I have a 1 GB fiber connection, shared between 5 VLAN's (10-15) each capped at 200mbit. VLAN 10-14 all use port 4 of the router and go to a switch.
Because I am going to extend the network with another 5 VLAN's (16-20), I would like to get a seconds fiber connection (1GB), configure port 2 as WAN and use port 5 as the LAN for VLAN 16-20. I've searched for a while and tried some thing but I cannot seem to get this working.
Is there a distincive way to say VLAN 10-14 use WAN1 and VLAN 16-20 use WAN2?
I hope this clarifies what I am trying to reach, if not feel free to ask :)
Thanks!
See image below for clarification
