Mesh Connection Possibility in VIGI
So, I am doing whole surveillance system in a home and there are two points around which cameras will be connected one around the main house and one in a farm that is about 500 m away. I am going for the TP-Link VIGI NVR1016H 16 Channel, but i have some problems and questions.
First Solution
- Connection at the main house.
There is a router there to which i will connect the nvr and also get one LAN into PoE from the router to the top of the house and connect Tp-Link CPE 210 (more on that later) which will be in bridge mode and act as an AP on at the main house to which i will connect all the cameras around the main house because the router connection is weak and this can also provide good wifi all over the house - Connection at the Farm
Another Tp-Link CPE 210 will be at the farm receiving connection from the other one in Bridge mode and the CPE will also act as an AP and connect to all the Cameras.
My Doubts
Does the VIGI C-340 or any camera of the VIGI line up for that matter without 'W' in the name connect directly to any Wi-Fi connection or not?
Alternate Solution
I read the C340-W and its datasheet and it said about an AP/AP Client mode now that mode must be possible with the PoE ofcourse but is it possible if it is connected wirelessly instead and just given power can it connect to the Wi-Fi and act as a kind of a repeater and provide other cameras connection this way i can chain the cameras for a long distance eliminating the need for the CPE's altogether.
Please feel free to make any suggestions.
Please someone help.
I am quite new to this