ER605 V1 with Omada doest not work properly with Linux/HUAWEI Router
Hi, I have ER605 V2 and V1 routers.
Four of them configured with Omada 5.13.30.4
The ER605 V2 works normally.
The ER605 V1 takes more time and little work but works.
The problem is.
If I create a second LAN, let's say 11.11.0.1/24 and attach it to the port number 3 for example.
If I plug a computer running LINUX it does not works. Windows works normally.
The LINUX computer get the ip by DHCP normally, but I can't ping to my gateway '11.11.0.1' (in our example) or ping to the internet.
If I use the main LAN (that one that we cannot change), it works normally (even If I change the IP of this LAN).
So the problem with LINUX is when I set another LAN to the port it is connected to.
I reproduze the same configuration in ER605 V2, everything works ok.
Works with LINUX normally.
And I didn't change anything, is the same configuration.
Somebody could help?
Add: Downgrade the controller is not a option.
Add2: The HUAWEI Wifi AX2 Router has the same problem. (the router is upgraded, with ER605 V1 Omada it didnt' works).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ok, I will not continue our discussion, because in the end, you said you saw the problem.
and because that I'm think you inclined to help, despite our disagreement, as now you understand more clearly what is happening.
I will wait your feedback.
Thanks for your time.
and just to be fair: our enterprise needed to shutdown some of our cloud services few times to put the ER605V1 back in the main router to send you the tests.
so, it was complicated for me too.
Have a good time
and thanks for your help.
- Copy Link
- Report Inappropriate Content
Hi @drigo
Thanks for posting in our business forum.
drigo wrote
Ok, I will not continue our discussion, because in the end, you said you saw the problem.
and because that I'm think you inclined to help, despite our disagreement, as now you understand more clearly what is happening.
I will wait your feedback.
Thanks for your time.
and just to be fair: our enterprise needed to shutdown some of our cloud services few times to put the ER605V1 back in the main router to send you the tests.
so, it was complicated for me too.
Have a good time
and thanks for your help.
Test team has been informed. I also provided my test results to them as well. "Something is not right", was a comment from a test team member.
They find it hard to believe as I did at the beginning and I was convincing them as well by the Wireshark, route and config screenshots.
Now they are looking into this and testing it locally. I'll update you as soon as they update me.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @drigo
drigo wrote
So, for this old model, a specific compatibility issue/bug fixing is not high high-priority task in the eye of the dev. I did not get any further reply so far from them or after the vacation.
I am checking this again with them on if they have located the reason and if it is considered as a bug.
- Copy Link
- Report Inappropriate Content
Hi, it's about 1 month since you saw the problem.
Do you have any feedback if this problem will get a fix?
Thank you
- Copy Link
- Report Inappropriate Content
Hi @drigo
Thanks for posting in our business forum.
drigo wrote
Hi, it's about 1 month since you saw the problem.
Do you have any feedback if this problem will get a fix?Thank you
No. I did not get a reply to this question after the last time I set up a test network. Tried some suggestions from the dev. But it seems that this does not move on. There is a problem with the arp and we have not located the reason.
- Copy Link
- Report Inappropriate Content
@Clive_A Hi, its been about 3 months I opened this thread.
No fix so far.
As I said, this router bornt broken.
It never worked as was to be.
Say that it is in EOL state is not valid.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1595
Replies: 24
Voters 0
No one has voted for it yet.