Help with VLAN Configuration on TP-Link ER605 Router and TL-SG1016DE Switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I am setting up a network with multiple VLANs and have encountered some issues with the VLAN configuration. I've configured VLANs with IDs 10, 20, 30, and 40 on both my TP-Link ER605 router and TP-Link TL-SG1016DE switch. However, I'm unsure about the proper setup
Here's how I've set things up:
On the TL-SG1016DE switch, VLANs are set up as follows:
- VLAN 10: Ports 1-4 (Tagged on Port 1)
- VLAN 20: Ports 5-8 (Tagged on Port 1)
- VLAN 30: Ports 9-12 (Tagged on Port 1)
- VLAN 40: Ports 13-16 (Tagged on Port 1)
TP-Link TL-SG1016DE
What additional settings are required on the ER605 router to enable inter-VLAN routing and internet access for all VLANs?
How can I ensure that the VLAN configurations on the switch and the router allow for proper inter-VLAN routing and internet access?
Any step-by-step guidance or resources you can provide would be immensely helpful as I'm not sure what I might be missing in the configuration.!
Hi @Edward365
Thanks for posting in our business forum.
You don't have to set up anything else. And no need to worry about the routing. VLAN interface has done all.
There is a guide. Use the label and filter.
If you are new to the forum, make sure you read the guide first.
