ER605 and ACL/segmentation
Hi all.
I've been runing an ER605 for a while.
Now want to segment a bit on the LAN side and the primary reason is security.
Now I seem not to be able to limit traffic between segments regardless of the vlan or rules.
Is this due to tagging on the ports?
This guide is not working (effectless) with the current setup.
Why is this?
Thanks for any tip!
BR.
Greg
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @GregZaaa
Thanks for posting in our business forum.
You can try out this FAQ. ACL is needed to stop inter-VLAN traffic. VLAN interface, by default, allows traffic between the interfaces.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @GregZaaa
Thanks for posting in our business forum.
GregZaaa wrote
I am running stand-alone. And what does mean really? What does it support?
1. I would recommend you take a look at the User Guide. Play around with it. ACL is very straightforward. Protocol, port, SRC, and DST.
There is no specific guide on how you configure it but ideas on how to achieve different goals. Take a second and browse through the KB on the forum.
2. If you need a step-by-step guide or walkthrough, please call the support number. A rep can walk you through it.
I don't intend to answer the low-effort questions. which were not explicitly described initially and are not the goal of the forum to discuss and improve the skills.
Standalone have the ability to choose the "service" which is the difference in controller mode. Which is the direction I pointed out for you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 491
Replies: 5
Voters 0
No one has voted for it yet.