Access Modem Admin Site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access Modem Admin Site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access Modem Admin Site
Access Modem Admin Site
2024-05-13 16:37:22 - last edited 2024-05-14 19:06:42
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4
Hello,

I have successfully integrated the ER605v2 into my network. The LTE modem was configured as a bridge and the ER605 can successfully access the Internet.

- ER605 has the IP address 192.168.1.1/24
- The modem (ISP) has the IP address 192.168.0.1 in bridge mode, connected to the WAN port of the ER605.

My computer is connected via LAN. When I try to access the modem's admin page with 192.168.0.1 I get an error page
with Access Error: Site or Page Not Found Cannot open URL ?

If I access the IP address 192.168.0.1 via my cell phone's WiFi, I can easily get to the modem's admin page.
I've already tried Static Route, it doesn't work either.
What can I do to get to the modem's admin page?
 
Controller software is currently 5.13.30.8.

Thanks,
  0      
  0      
#1
Options
1 Accepted Solution
Re:Access Modem Admin Site-Solution
2024-05-14 01:13:19 - last edited 2024-05-14 19:06:42

Hi @zerow 

Thanks for posting in our business forum.

There is no way to access it if it is in bridge mode and giving a public IP to your router.

It will only work if your router is getting an IP(WAN) 192.168.0.1/24. Then you can access your router via 192.168.0.1.

So, please confirm what IP you get on the WAN on ER605.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Access Modem Admin Site-Solution
2024-05-14 01:13:19 - last edited 2024-05-14 19:06:42

Hi @zerow 

Thanks for posting in our business forum.

There is no way to access it if it is in bridge mode and giving a public IP to your router.

It will only work if your router is getting an IP(WAN) 192.168.0.1/24. Then you can access your router via 192.168.0.1.

So, please confirm what IP you get on the WAN on ER605.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Access Modem Admin Site
2024-05-14 19:06:35
Hello, THX for the answer! My IP from WAN is the official IP from ISP.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 393

Replies: 2

Related Articles