This Article Applies to: ER605(UN)_V2_2.1.1 Build 20230115 ER605(UN)_V2_2.1.2 Build 20230210 Issue Description/Phenomenon: Recently we received feedback that using ER605 V2 2.1.x firmware would cause

I have an IoT wifi network set up with ID 123, and have added a LAN with that ID as well. Then I had a gateway ACL set up to block that VLAN to access the internet, and a EAP ACL to block the VLAN fro

I have the following TP-Link hardware: - Omada Software Controller (on an Ubuntu linux box with a core-i5 and 12GB RAM) - 1 x TL-SG2008P switch - 4 x EAP 660HD Access Points - 1 x ER605 Router I found

We installed a SG3428MP switch about a little over a month ago. for 3 weeks it worked flawless. Then it dropped all the AP that were using PoE from the switch, limited Internet connectivity. Rebooting

When the ER605 router is rebooted clients with static IP reservations receive incorrect IP addresses from the default IP pool. Basic stuff this, do NOT issue IP addresses via DHCP until the static lis

Hi, I just received a new ER605. I tried to upgrade it with the latest version (ER605(UN)_V2.6_2.1.2 Build 20230210), which was taken from here: https://www.tp-link.com/us/support/download/er605/#Firm