This seems like the perfect small business switch to me if only it worked with the Omada controller. https://www.qnap.com/en-us/product/qsw-m2116p-2t2s 16x - 2.5 GbE PoE++ 2x - 10 GbE PoE++ 2x - 10 Gb

This article applies to OC200, OC300 In a few cases, Omada Hardware Controller may become bricked during the firmware upgrade. The most common cause is an unpredictable power failure. This article wil

I had the software controller V4.1.5 and updated it to 4.4.3 like stated in the included manual. (backup, complete wipe and reinstall) After importing the backup file in the new version, I can't get t

Hello together I have the following problem: I have a test environment which are all in the same VLAN (physical server which is connected to port 22). All test servers are virtualized via Hyper-V. The

Running OC200 controller with a release 1 prior to latest (had issues where latest would not let me assign static IP's to devices.) I have my environment up and running with TL-R605 as router, 24 port

So far, I have used the gateway in a standalone mode. With controller 4.4.3, it is possible to change the LAN subnet so I thought that adopting the gateway should be ok now, but I'm getting "username