Pharos Wireless Bridges

TP-Link Pharos Outdoor CPEs are dedicated to Point-to-(Multi)Point transmission, ideal for short-to-medium range wireless communication among two or more locations. Anything related to Pharos Outdoor CPEs, welcome to ask questions, join discussions and share your experience/knowledge here.
Pharos Wireless Bridges

Tags

Label

 
I have two CPE210 devices as a bridge between two buildings, about 125 feet apart. Signal strength on client -40db. SNR 68db. I can run the speedtest tool and get 160 Mbps. One the AP side, on a compu
By idealtrucks · Latest post 2020-10-14 12:16:11 by idealtrucks
0Helpful
1678Views
4Replies
Client end of connection corrupts connection for multiple cameras. Ip 192.168.0.201 works fine 192.168.0.202 or any other connection dissapears when the client is connected to the network. 192.168.0.1
By JASTech · Latest post 2020-10-13 03:50:26 by Fae
0Helpful
334Views
1Replies
Here is my setup. I have three wireless access points configured. Arris (cable modem) 192.168.0.1 Hitman (hardwired back to Arris) 10.65.9.1 TP-Link_Outdoor (hardwired back to Arris) 10.10.9.1 Arris a
By Hitman1965 · Latest post 2020-10-13 03:39:38 by Fae
0Helpful
456Views
1Replies
Hi, I've put up two CPE 210 to extend my WiFi coverage to an apartment in our barn. The first is configured as an AP and the second I've tried with basically all modes but when I connect to it I get t
By Huzell · Latest post 2020-10-13 03:16:44 by Fae
0Helpful
405Views
1Replies
Hi all The descriptions of the modes in the instructions are not clear to me. My attempted installation is as follows. A TP-Link AC-1750 Wifi router serves a number of Smart Switches within it's range
By Dinosaur1946 · Latest post 2020-10-10 10:02:08 by Dinosaur1946
0Helpful
1426Views
7Replies
Good afternoon First of all, sorry if my English is not perfect as it isn't my mother tongue. I have bought two TP-link CPE 510 but I can't get them to work as expected. It seems that the AP CPE must
By kiboart · Latest post 2020-10-09 11:58:40 by Fae
0Helpful
550Views
1Replies
I am looking for an external wifi bridge to work between 2 buildings about 30m apart. 1 unit would be connected to a modem router and the other to a WAP with 4 ethernet ports which has yet to be purch
By Deadcanary · Latest post 2020-10-09 11:24:47 by Fae
0Helpful
419Views
1Replies
I am having a difficult time getting 2 cpe220's alligned. Here is my set up ( 100mbps fiber modem with 4 ports ) Lan1 EAP110 (working with only 1 client) Lan2 TpLink WR840n (AP in the garage also work
By gifi · Latest post 2020-10-07 13:34:55 by R1D2
1Helpful
879Views
3Replies
Hi, I have a CPE connection to a remote site cca 1,5 km distance, I'm using an CPE510 as client and a CPE610 as ap , everything worked fine for cca 1 month but now after some hours the cpe610 is not r
By M.-_123 · Latest post 2020-10-07 09:21:36 by Fae
0Helpful
1156Views
3Replies
I can connect my laptop to the CPE210 using an ethernet cable as per instructions (set laptop address to 192.168.0.1, connect to 192.168.0.254). The web pages all look as described. I configured the C
By bathbunny · Latest post 2020-10-04 12:04:03 by Yannie
0Helpful
967Views
1Replies
1697071...
1697071...