Model :

Hardware Version :

Firmware Version :

ISP :

My Deco seems quite reliable, but I have a Linux laptop that sometimes has a few problems. I was streaming a radio programme when the stream stalled and I ran the following ping test. The target is a printer on my internal network, so any issues are not related to my internet connection

[CODE]$ ping -c 50 192.168.199.10
PING 192.168.199.10 (192.168.199.10) 56(84) bytes of data.
From 192.168.199.111 icmp_seq=10 Destination Host Unreachable
From 192.168.199.111 icmp_seq=11 Destination Host Unreachable
From 192.168.199.111 icmp_seq=12 Destination Host Unreachable
From 192.168.199.111 icmp_seq=13 Destination Host Unreachable
From 192.168.199.111 icmp_seq=14 Destination Host Unreachable
From 192.168.199.111 icmp_seq=15 Destination Host Unreachable
From 192.168.199.111 icmp_seq=16 Destination Host Unreachable
From 192.168.199.111 icmp_seq=17 Destination Host Unreachable
From 192.168.199.111 icmp_seq=18 Destination Host Unreachable
64 bytes from 192.168.199.10: icmp_seq=19 ttl=255 time=1233 ms
64 bytes from 192.168.199.10: icmp_seq=20 ttl=255 time=213 ms
64 bytes from 192.168.199.10: icmp_seq=21 ttl=255 time=59.2 ms
64 bytes from 192.168.199.10: icmp_seq=22 ttl=255 time=5.21 ms
64 bytes from 192.168.199.10: icmp_seq=23 ttl=255 time=65.8 ms
64 bytes from 192.168.199.10: icmp_seq=24 ttl=255 time=36.6 ms
64 bytes from 192.168.199.10: icmp_seq=25 ttl=255 time=23.9 ms
64 bytes from 192.168.199.10: icmp_seq=26 ttl=255 time=3.93 ms
64 bytes from 192.168.199.10: icmp_seq=27 ttl=255 time=3.39 ms
64 bytes from 192.168.199.10: icmp_seq=28 ttl=255 time=23.8 ms
64 bytes from 192.168.199.10: icmp_seq=29 ttl=255 time=22.4 ms
64 bytes from 192.168.199.10: icmp_seq=31 ttl=255 time=5.22 ms
64 bytes from 192.168.199.10: icmp_seq=32 ttl=255 time=6.65 ms
64 bytes from 192.168.199.10: icmp_seq=33 ttl=255 time=4.72 ms
64 bytes from 192.168.199.10: icmp_seq=34 ttl=255 time=2.97 ms
64 bytes from 192.168.199.10: icmp_seq=35 ttl=255 time=13.5 ms
64 bytes from 192.168.199.10: icmp_seq=36 ttl=255 time=59.6 ms
64 bytes from 192.168.199.10: icmp_seq=37 ttl=255 time=5.31 ms
64 bytes from 192.168.199.10: icmp_seq=38 ttl=255 time=5.74 ms
64 bytes from 192.168.199.10: icmp_seq=39 ttl=255 time=20.5 ms
64 bytes from 192.168.199.10: icmp_seq=40 ttl=255 time=8.85 ms
64 bytes from 192.168.199.10: icmp_seq=41 ttl=255 time=3.59 ms
64 bytes from 192.168.199.10: icmp_seq=42 ttl=255 time=7.95 ms
64 bytes from 192.168.199.10: icmp_seq=43 ttl=255 time=5.72 ms
64 bytes from 192.168.199.10: icmp_seq=44 ttl=255 time=22.2 ms
64 bytes from 192.168.199.10: icmp_seq=45 ttl=255 time=5.97 ms
64 bytes from 192.168.199.10: icmp_seq=46 ttl=255 time=3.02 ms
64 bytes from 192.168.199.10: icmp_seq=47 ttl=255 time=6.28 ms
64 bytes from 192.168.199.10: icmp_seq=48 ttl=255 time=6.63 ms
64 bytes from 192.168.199.10: icmp_seq=49 ttl=255 time=21.8 ms
64 bytes from 192.168.199.10: icmp_seq=50 ttl=255 time=6.50 ms

--- 192.168.199.10 ping statistics ---
50 packets transmitted, 31 received, +9 errors, 38% packet loss, time 49527ms
rtt min/avg/max/mdev = 2.970/61.783/1233.983/217.508 ms, pipe 4[/CODE]

Another Linux laptop sat next to it appears to have no similar issues, so I guess it is specific to the interface between that laptop and the Deco. Previously it seemed to have no more issues with a BT Whole Home than any other client, however, before I was using modern mesh systems the wifi seemed to struggle to connect to APs outside the room it was in. I'm guessing it's mainly down to a cheap internal Wifi.

Can anyone offer any deeper insight?