nc450 sd card formatting problem

nc450 sd card formatting problem
nc450 sd card formatting problem
2018-09-17 20:26:06 - last edited 2020-09-22 06:29:16
Model : NC450

Hardware Version :

Firmware Version :

ISP :

I have this camera and every week i get this problem when thr sd card full try to formatting but stop to work the sd card work correctly.I have to format on the pc and do again every week can you help in this?? Thanks



1
1
#1
Options
2 Accepted Solutions
Re:nc450 sd card formatting problem-Solution
2020-09-17 08:02:12 - last edited 2020-09-22 06:29:16

@csumi21 

Turning 24-hour recording did not make the slightest change in status. Exept that it says "NETWORK ERROR" when I try to start 24 hour recording again. 
It must be an error in the software. But I guess that TP-Link will turn the blind eye to this. Otherwise they would have fixed it months / years ago.  

Best Solution
0
0
#35
Options
Re:nc450 sd card formatting problem-Solution
2020-09-22 06:27:41 - last edited 2020-09-22 06:29:23

@Pede63 

Good day.

Thank you very much for your time and patience.

Sorry for the delay.

For anyone who would have the same issue, please refer to the following instruction to check and repair the SD card:

(which are suitable for NC cameras as well)

https://www.tapo.com/faq/93/

 

and if the SD card can still not be able to reset, please help us get the following information:

The brand & model of the SD card, as well as its storage capacity and format type. A picture of the card would be highly appreciated;

 

Thank you very much.

Best Solution
0
0
#36
Options
31 Replies
Re:nc450 sd card formatting problem
2018-10-03 19:01:32
I have this problem too. Hope yo have some answer or support from tplink. The time line for recording does not appear too. Otherwise this was a good camera.
0
0
#2
Options
Re:nc450 sd card formatting problem
2018-10-06 04:23:44
ihve same problem

www.dryaman.com
0
0
#3
Options
Re:nc450 sd card formatting problem
2018-10-07 23:05:29
I am having this issue rn, so good to feel it's not my fault and other users experience this.
0
0
#4
Options
Re:nc450 sd card formatting problem
2018-10-10 09:33:10
can someone tell me what is the max storage SD card capacity that I can buy for NC 450 camera?
0
0
#5
Options
Re:nc450 sd card formatting problem
2018-10-11 18:24:09
i have the same issue, i inserted a card and it cannot be read, sometime prompt me for for matting but says my card is damaged and cannot be formatted... anyone please help
0
0
#6
Options
tp support taking too long
2018-10-17 02:38:05
Same thing here. Trying to find a solution with tp link support team for a month. I noticed that recordings stopped a night at 3 AM so my mind got to auto reboot function. Tp link support insisted that I don't disable it (imagine the bugs...) but after they tried everything, they told me to disable it because it is just there for wifi issues. I just did it so I don't know if this works. I will send feedback.
0
0
#7
Options
Re:nc450 sd card formatting problem
2018-10-21 03:27:23
I have same issues... too bad
0
0
#8
Options
Re:nc450 sd card formatting problem
2018-12-29 22:18:38

Similar issue, I have a 32Gb Sd Card which when formatted works fine and then seems to stop recording, the app says SD card formatting (but this never completes)

I can remove the card and format it on PC but it keeps reocurring 

 

 

0
0
#10
Options
Re:nc450 sd card formatting problem
2019-03-27 21:28:43

Hello All

 

I've been having this issue for as long as I can remember and its finally annoyed me enoguh to Google the issue... has anyone found a solution yet or has TP-Link not replied?

0
0
#11
Options
Re:Re:nc450 sd card formatting problem
2019-03-28 01:55:32

Darcy wrote

Hello All

 

I've been having this issue for as long as I can remember and its finally annoyed me enoguh to Google the issue... has anyone found a solution yet or has TP-Link not replied?

Hey Darcy,

 

what is the capacity and format of the SD card? Try to format it with some 3rd party programs or change another SD card to do a comparison test.

 

And ensure that the firmware is up to date. 

 

0
0
#12
Options