WR841ND wds configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR841ND wds configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR841ND wds configuration
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-06
2012-11-06 08:13:57
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-06
WR841ND wds configuration
2012-11-06 08:13:57
Tags:
Region : Italy
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : TL-WR841ND_V8_120802
ISP :
I have a network consisting of a d-link wifi router that connects to ADSL.
I setup the WR841ND in wds and easily connect to d-link.with the ping utility of the WR841ND I can reach the d-link or any of the PCs attached to the d-link and receive an answer.
but any PC 'attached via LAN or WIFI to WR841ND can ping only WR841ND and not the d-link or any other PC attached to the d-link (clearly not even go on the Internet ....)
TL-WR841ND_V8_120802 on hw 8.1
Any help will be appreciated :D
S
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : TL-WR841ND_V8_120802
ISP :
I have a network consisting of a d-link wifi router that connects to ADSL.
I setup the WR841ND in wds and easily connect to d-link.with the ping utility of the WR841ND I can reach the d-link or any of the PCs attached to the d-link and receive an answer.
but any PC 'attached via LAN or WIFI to WR841ND can ping only WR841ND and not the d-link or any other PC attached to the d-link (clearly not even go on the Internet ....)
TL-WR841ND_V8_120802 on hw 8.1
Any help will be appreciated :D
S
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
13 Reply
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-01-10
Re:WR841ND wds configuration
2013-01-10 16:36:10
The same here.. and I bought this router only for that..
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#12
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-01-13
Re:WR841ND wds configuration
2013-01-13 12:56:22
I had the same problem until I enabled UPnP on both AP and Bridge. Also, I disabled SPI, don't know if this helped. Works great now two TL-WR841N's both v8.2, firmware 120802 one as AP the other as Bridge.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#13
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-01-23
Got Ethernet Working with WDS!!!
2014-01-23 10:13:47
So, here is what I did to enable ethernet connections with WDS.
1. Reset router to factory settings and connect only your wired computer via ethernet cable (no need to connect to the modem since you are using WDS)
2. Insert CD and click easy setup assistant
3. Let the assistant enable the network adapter
4. Check that your ethernet connection has a Default Gateway in your Network Connection Details
5. Once easy setup assistant says the network adapter is enabled, exit the wizard without finishing.
5. Connect to the router's IP (same IP as default gateway) to configure and set up WDS as noted in the user manual (Enable WDS, fill out SSID of AP, disable DHCP)
6. Reboot.
7. Try connecting via ethernet.
This worked for me. Before I tried using the CD, I could not connect to the network via ethernet. Only wireless. The wireless worked great, but the network did not identify properly when connected over ethernet.
If you have a question, or my instructions make no sense... reply or PM me.
Alex
1. Reset router to factory settings and connect only your wired computer via ethernet cable (no need to connect to the modem since you are using WDS)
2. Insert CD and click easy setup assistant
3. Let the assistant enable the network adapter
4. Check that your ethernet connection has a Default Gateway in your Network Connection Details
5. Once easy setup assistant says the network adapter is enabled, exit the wizard without finishing.
5. Connect to the router's IP (same IP as default gateway) to configure and set up WDS as noted in the user manual (Enable WDS, fill out SSID of AP, disable DHCP)
If you want to setup wireless security, and a new SSID for the TP Link router, do it now, before you reboot.
6. Reboot.
7. Try connecting via ethernet.
This worked for me. Before I tried using the CD, I could not connect to the network via ethernet. Only wireless. The wireless worked great, but the network did not identify properly when connected over ethernet.
If you have a question, or my instructions make no sense... reply or PM me.
Alex
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#14
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-06
2012-11-06 08:13:57
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-06
Information
Helpful: 0
Views: 2283
Replies: 13
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message