Archer C2300 V1 - QoS problems with 240/20 ISP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Greetings!
I'm using the latest firmware in my C2300 and when I configure QoS (terrible conf management by the way), it simply cuts down in half my ISP connection. The only way to maintain full speed is disabling QoS, when, disabled, I get several latency instabilities (ORLY?).
Please TP-Link, fix this ASAP and improve C2300 firmware with more addons like, uptime viewer, scheduled reboots, advanced QoS management etc.
We all know that you can do better than "this firmware isn't working properly".
I'm also accepting to be a beta tester and feedback to you.
Att.
Felipe
Firmware -> 2.0.3 Build 20180611 Rel. 77668
Hardware -> Archer C2300 v1.0
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi There,
Sorry for the trouble.
We didn't receive this kind of feedback before.
May I know what kind of Qos that you setup, device Qos or Application Qos?
If you setup Application Qos, the desired application will have faster speed, other service will have low priority.
If you setup Device Qos, the device should get high priority for all network behaviors.
And you mentioned if you disable Qos ,the router will give you latency and unstable connection?
May I know how unstable it is and how can you make it work again?
Thanks for your detailed information in advance.
- Copy Link
- Report Inappropriate Content
Hello Kevin!
If I want full speed I MUST have to disable QoS (selecting standard option) and not giving priority to any device as well.
http://www.speedtest.net/result/7875705976.png - Without QoS
http://www.speedtest.net/result/7909421062.png - With QoS
It would be awesome if we could have in further firmwares, a fully customizable QoS, like dd-wrt ( https://forum.dd-wrt.com/phpBB2/files/ddwrt_qos_01_267.jpg ) would be VERY APPRECIATE. Also, uptime status and scheduled reboots would be extremely interesting as well.
Thanks in advance.
Felipe
- Copy Link
- Report Inappropriate Content
Hi Felipe,
Thanks for the feedback, TP-Link will look into the case. But please do not upgrade to thrid party's firmware, it will destroy the warranty.
Have a good day.
- Copy Link
- Report Inappropriate Content
Hi Kevin!
I'll wait for a solution from TP-Link before try another method. Please, let me know if TP-Link releases further beta firmwares for testing and feedbacking, I'll help you out.
Regards
Felipe
- Copy Link
- Report Inappropriate Content
Hi Kevin!
Still waiting here!
- Copy Link
- Report Inappropriate Content
Hi,
Sorry to tell you that there is no new firmware yet.
While we can do some troubleshooting regarding to this issue.
Could you please run a speed test vith the speedtest function on the web interface of the C2300.
Note: Please test it with/without QoS enabled, and please show us the screenshots.
Thanks in advance, and have a nice day.
b0x wrote
Hi Kevin!
Still waiting here!
- Copy Link
- Report Inappropriate Content
b0x wrote
Greetings!
I'm using the latest firmware in my C2300 and when I configure QoS (terrible conf management by the way), it simply cuts down in half my ISP connection. The only way to maintain full speed is disabling QoS, when, disabled, I get several latency instabilities (ORLY?).
Please TP-Link, fix this ASAP and improve C2300 firmware with more addons like, uptime viewer, scheduled reboots, advanced QoS management etc.
We all know that you can do better than "this firmware isn't working properly".
I'm also accepting to be a beta tester and feedback to you.
Att.
Felipe
Firmware -> 2.0.3 Build 20180611 Rel. 77668
Hardware -> Archer C2300 v1.0
QoS bug, inter alia, is well known for several models. Sadly, there seems to be no intention for new `bug free` firmware.
https://community.tp-link.com/en/home/forum/topic/157557
https://community.tp-link.com/en/home/forum/topic/111869
https://community.tp-link.com/en/home/forum/topic/107270
https://community.tp-link.com/en/home/forum/topic/109174
https://community.tp-link.com/en/home/forum/topic/109179
https://www.reddit.com/r/HomeNetworking/comments/ayxzpa/problem_with_archer_c3150/
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2309
Replies: 7
Voters 0
No one has voted for it yet.