Forwarding Does not work
Hi all,
In the drop down list there hasn't been TD-W9980 which is what I own:
Firmware Version:0.6.0 1.12 v0021.0 Build 150507 Rel.40130n
Hardware Version:TD-W9980 v1 00000000
I can't expose my webserver with the fowarding feature (vitrual server).
1. I followed any FAQs seen online and defined the host & service port.
2. I checked that locally I can access the server.
3. I verified I have on my router/modem public WAN ip which I can access to.
Some more info:
DSL
Line Status:Connected
DSL Modulation Type:VDSL2
Annex Type:Annex A/B/L/M
LAN
MAC Address:C4:E9:84:D0:3E:97
IP Address:192.168.1.1
Subnet Mask:255.255.255.0
DHCP:Enabled
IPv6 LAN
IPv6 Address:N/A
Prefix Length:64
Autoconfiguration Type:RADVD
Wireless 2.4GHz
Status:Enabled
Channel:Auto(Channel 6)MAC Address:C4:E9:84:D0:3E:97u
Channel Width:Auto
Mode:11bgn mixed
Encryption:WPA-PSK/WPA2-PSK
Max Tx Rate:300Mbps
WDS Status:Disabled
It is very important for me that this will work, one way or another (if you can point the way)
Than you,