TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support
TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support
2020-01-01 14:23:54 - last edited 2020-02-24 12:02:23
Model: TD-W9977
Hardware Version: V1
Firmware Version: 0.6.0 2.10 v0022.0 Build 150519 Rel.57562n

Hi all,


will oder is there any firmware supporting VDSL2-Vectoring / ITU-T G.993.5 for this router from TP-Link?

 

N600
TD-W9980B(DE) v1 00000000

0.6.0 2.10 v0022.0 Build 150519 Rel.57562n


afaik the hardware Lantiq-VRX200 is capable of G.993.5 not only G.993.2.

 

German Telekom uses G.993.5 on their lines, so my N600 connects on a fallback profile only.

 


Thanks in advance

Dan

0
0
#1
Options
1 Accepted Solution
Re:TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support-Solution
2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

@tping 

 

Hello, the TD-W9980B supports: 

Standards VDSL2 ITU-T G.993.2
Standards ADSL Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1(G.DMT)
ITU-T G.994.1 (G.hs)
ITU-T G.995.1
Standards ADSL2 ITU-T G.992.3 (G.dmt.bis)
Standards ADSL2+ ITU-T G.992.5

 

Considering this device is end of life, I'm afraid that there is no firmware for it. While you still can keep an eye on official website for the updates.

 

Good day. 

 

Recommended Solution
0
0
#2
Options
1 Reply
Re:TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support-Solution
2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

@tping 

 

Hello, the TD-W9980B supports: 

Standards VDSL2 ITU-T G.993.2
Standards ADSL Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1(G.DMT)
ITU-T G.994.1 (G.hs)
ITU-T G.995.1
Standards ADSL2 ITU-T G.992.3 (G.dmt.bis)
Standards ADSL2+ ITU-T G.992.5

 

Considering this device is end of life, I'm afraid that there is no firmware for it. While you still can keep an eye on official website for the updates.

 

Good day. 

 

Recommended Solution
0
0
#2
Options