How can I change the 5ghz channel in deco m4?which is now in 44.But I want the channel 157
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My OnePlus 7 pro don't connect with 5ghz wifi which is in channel 44.my phone supports 5ghz channel 157.But there is no option to change the channel in 192.168.68.1 or in the deco app.So what can I do now?
Please help me
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Deco does not support changing wireless channels yet.
For the detailed reason, please refer to this link: https://community.tp-link.com/en/home/forum/topic/154561?replyId=493338
As for The beta firmware, it is for Bangladesh users only since band 1(channel 36-48) for 5ghz is prohibited here and only band 4(channel 149-165) is allowed;
So if there are no specific issues, like slow speed or network instability, some IOT devices not able to connect, please do not worry about the current channels;
While if there is, please try to provide more details about your current problem and we will check whether it is channel-related and if there are any other suggestions to fix the current issue;
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi, do all of your 5G devices are using band 4 channel?
5G band 1 channel: 36~48, band 4 channel: 149~165.
On the bottom of the Deco M4, please help to check what's the version of the Deco, US or EU?
What's the firmware version of your Deco M4?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello,
Currently, the Deco M4 5G only works on band 1 and it doesn't support band 4 channels. We will update you once we have a firmware supports band 4 later.
Please wait patiently. Thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, you need to describe your issue or inquiry in detail then we will see how to help you with it.
Currently, it's unable to change the channel on the Deco as it will select the best channel automatically to have good Wi-Fi performance. Changing the Wi-Fi channel on the Deco app has been forwarded to the developers and they are evaluate how to improve the channel algorithm, we will soon release new firmware in the near future and it is suggested to keep an eye on your Deco app or the official website.
Good days.
- Copy Link
- Report Inappropriate Content
Generally, if you notice that your Deco Wi-Fi network is sharing a channel with several other networks, don’t worry. Crowded isn’t the same as busy, even though some channel scanning apps tell you one specific channel is busy, they don’t always measure other sources of congestion and interference. Non-Wi-Fi signals (like those from microwaves, Bluetooth devices, cordless phones, garage door openers, baby monitors, etc.) can all congest a channel but may not show up in a scan. So it’s possible that a channel can appear empty, while it is, in fact, saturated with other kinds of interference.
If your Deco Wi-Fi network is using a crowded channel but you aren’t experiencing slow speeds, don't worry. Your point is always scanning its environment to choose the channel that is most likely to give you the best Wi-Fi.
However, if your speed is affected a lot, you may refer to the below troubleshooting suggestions first to check and modify the basic settings on your network:
https://www.tp-link.com/support/faq/2429/
BTW, you may try to enable the 2.4G only for the guest network and enable 5G for the main to give it a go, then monitor the performance, which may be a good try.
- Copy Link
- Report Inappropriate Content
TP-Link_Deco wrote
Hello,
Currently, the Deco M4 5G only works on band 1 and it doesn't support band 4 channels. We will update you once we have a firmware supports band 4 later.
Please wait patiently. Thanks.
My speed has dropped due to the interference. Mind to send me the 5Ghz band 4 unlocked firmware? I have Deco M4(US) V1. Currently on firmware 1.4.3
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have the same issue the app wifi analyser says change to channel 48 but the device runs on channel 44. How can I change this. I already have a bad environment with thick walls I need every advantage I can get
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 31539
Replies: 52
Voters 3
