Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually

Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-12 08:26:24

@Kevin_Z 

 

I did these steps:

 

1) reset to factory

2) reconfigure all parameters

reboot failed

So I disconnected power, waited 15s and powered on

 

3) reflashed the same beta firmware (last 201204)

Then I tried about 10 reboot and everything went fine

 

Thanks

0
0
#432
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-16 02:46:04

@Berserk76 

 

Good to know it works fine now, let me know if there is an issue, good day.

0
0
#433
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-21 09:36:47

@Kevin_Z 

Hi recently i bought tplink mr600 v1 and was curious to update it to beta firmware....can u tell me which is the latest beta firmware to flash..which allows to select band for CA( carrier aggregation).

0
0
#434
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-22 02:18:48

@pracheta 

 

Hi, you can get the latest beta firmware here:

https://community.tp-link.com/en/home/forum/topic/241534

0
0
#435
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-25 16:28:43 - last edited 2020-12-25 16:33:59

No proper solution for v1 at all.. very bad with TPLINK after paying much for this router.. and now I have almost 6 TPLINK routers and suggested the same my friends circle, now ended with unsatisfactory form them as well as they depend on my guidance.  and its time change to other brand or alternate method. 

1
1
#436
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-26 08:51:00

@Satheskumar Merry Christmas to TP link Forum.Its been a quite long time since I am out of these pages. I have taken a wise decision after I disposed of the box MR600.I am quite impressed with the Huawei B525s-65a LTE router. It's delivering constant speeds and locking the bands together effectively. I am using it with Airtel on CA_40A-40A. Peak hours and off hours LTE speeds are amazing. Have flashed it with a custom Firmware to lock the PCI/ CellID which is really beneficial in getting the best signal from my nearest tower. details below. The results are with external cross polarized panel Antenna.

Satheskumar wrote

No proper solution for v1 at all.. very bad with TPLINK after paying much for this router.. and now I have almost 6 TPLINK routers and suggested the same my friends circle, now ended with unsatisfactory form them as well as they depend on my guidance.  and its time change to other brand or alternate method. 

 

 

 

Regards, Abhi
0
0
#437
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-27 07:33:50 - last edited 2020-12-27 17:31:41

This is the last version working for me:

1.1.0 0.9.1 v0001.0 Build 200417 Rel.75138

I uninstalled the December version because the router frequently didn't start well.

0
0
#438
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-27 15:37:24
yes all says that have probleme in reboot not boot corectly
0
0
#439
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-27 15:47:43

@sassi 

 

Yes even i have faced the same issue today.. I thought proplem with laptop wifi the I noticed other devices also not able to connect with tplink router, i did reset router to solve problem.. hope we get some fix pack from tplink shortly.

sassi wrote

yes all says that have probleme in reboot not boot corectly

 

0
0
#440
Options
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
2020-12-27 15:48:38
Yes thanks Abhi.. I checking to buy the same.
0
0
#441
Options