VPN Passthrough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN Passthrough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN Passthrough
VPN Passthrough
2013-01-24 20:45:47
Region : UnitedKingdom

Model : TD-W8960N

Hardware Version : V3

Firmware Version :

ISP : ADSL24


Hi All,

anyone know how to successfully get VPN passthrough working with the W8960N?

I have the W8960N providing internet to local device. I want to setup a second router, TP-Link 1043ND with WW-DRT and PPTP set up to provide a separate access point for PPTP tunnelling to VPN servers outside of the UK. HideMyAss are providing VPN servers I wish to connect to.

I have followed instruction to set up both routers but would like to know if I am missing something....
First router 192.168.1.1 is basically untouched but with ports under NAT added: ports 1723 and 47 for my second router at local IP 192.168.1.111
Second router is set up according to: http://wiki.hidemyass.com/DD-WRT_PPTP_Setup

I know VPN work via just my first router. I can tunnel through using an Android tablet and connect to any HMA VPN server without changing anything on the 8960N.
So is it the second router?...
  0      
  0      
#1
Options
1 Reply
Re:VPN Passthrough
2013-01-25 15:58:25
is this your network connection:
PC ---1043----8960(dial up the internet) ----internet
|
VPN server
8960 should support VPN passthrough which is enabled as default.and you have set the port forwarding on the 8960 for the 1043?
the connection type on the modem is PPPoE or PPPoA? If it is PPPoE, you could try to set the modem 8960 as bridge mode, and PPPoE on the 1043
  0  
  0  
#2
Options