Home

Forums

Stories

Knowledge Base

Home Network Community > Powerline Adapters > WPA8630 only getting 100Mbit

< Powerline Adapters

WPA8630 only getting 100Mbit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WPA8630 only getting 100Mbit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Steveynet

2020-10-30 17:50:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-10-30

WPA8630 only getting 100Mbit

2020-10-30 17:50:40

Model: TL-WPA8630P KIT

Hardware Version: V2

Firmware Version: 2.0.3 Build 20171018 Rel.36564

Hi,

I've recently upgraded my internet to gigabit. No matter what I do I cannot get anything more than 100mbit to come across my WPA8630s.

They claim to be connected at 400mbits plus as below

Whether connected via ethernet or wifi - same performance practically. No device connected gets over 100mbit.

I've done the following;

Got the latest firmware

Removed all other devices

Plugged both directly in to wall sockets

Bought new CAT6 cables

Checked cables in other devices (1Gbit to all other devices)

Nothing appears to works?

Any one have any ideas?

Cheers

Steve

3 Reply

bob888

LV2

2020-10-31 16:17:51

Posts: 31

Helpful: 27

Solutions: 4

Stories: 0

Registered: 2020-10-10

Re:WPA8630 only getting 100Mbit

2020-10-31 16:17:51

@Steveynet

Plug both powerline adapters into the same double outlet AC power wall socket (or AC power wall sockets within same room) and do a speed test over ethernet. Do you see over 100 mbps?

Steveynet

LV1

2020-10-31 17:25:08

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-10-30

Re:WPA8630 only getting 100Mbit

2020-10-31 17:25:08

Hi Bob, Thanks for the reply, have just tried that - no difference. I think these will be going back to the shop :(

Solla-topee

2020-11-02 09:32:27

Posts: 13167

Helpful: 2258

Solutions: 1847

Stories: 8

Registered: 2020-05-19

Re:WPA8630 only getting 100Mbit

2020-11-02 09:32:27

@Steveynet

Good day,

Thanks a lot for your time and patience.

Have you tried to reset the two adapters and pair them again to have a look?(How to reset: hold the reset button/pinhole for at least 5 seconds)

If possible, could you please connect the TL-WPA8630P via cable to the main router(leave the TL-PA8010 unplugged), then connect the computer to the second port of TL-WPA8630p to see how much speed on the computer?

By the way, if the computer is connected to the router directly via the same Ethernet port, how much speed from the computer?

Thanks a lot.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

WPA8630 only getting 100Mbit

WPA8630 only getting 100Mbit

Information

Voters 0

Tags