Deco changing its "LAN IP" settings by itself

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco changing its "LAN IP" settings by itself

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco changing its "LAN IP" settings by itself
Deco changing its "LAN IP" settings by itself
2021-01-12 10:28:43 - last edited 2021-04-27 10:16:15
Model: Deco P9  
Hardware Version:
Firmware Version: 1.1.2 Build 20200918

When first installing my deco system, LAN IP was set at 192.168.68.1 with 255.255.255.0 as mask.

 

Sometimes, following a restart or a disconnect from the bridge, the LAN IP change to 192.168.0.1

This is highly annoying since I've got some devices that needs a static IP and I lose control over my system and lose functionalities when this change occurs.

 

Can you please tell me if it's a bug or if another setting overrides this "LAN IP"?

 

Recent changes to my system have been :

- Changed my main deco from a M4 to a P9

- My 4G router is now in bridge mode

 

Thanks

  3      
  3      
#1
Options
1 Accepted Solution
Re:Deco changing its "LAN IP" settings by itself-Solution
2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

@Yugnat 

Hi, thanks for your feedback.

It is more related to the IP conflict.

And if possible, could you please help me check the following information on the Deco APP:

1. the IP settings on the IPV4 page, like internet IP address, DNS server;

2. the LAN IP address on the Deco;

-if there is any conflict, Deco would change its LAN IP address;

 

For more details, please have a look at this link: https://community.tp-link.com/en/home/forum/topic/203366?replyId=586262 

Thank you very much and wait for your reply.

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Deco changing its "LAN IP" settings by itself
2021-01-12 14:55:44

Same issue here. Deco M9 Plus with ISP's router in bridge mode. The Deco is changing its LAN IP by itself leaving my entire house offline. It keeps doing it after a reboot. No recent changes.

  3  
  3  
#2
Options
Re:Deco changing its "LAN IP" settings by itself-Solution
2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

@Yugnat 

Hi, thanks for your feedback.

It is more related to the IP conflict.

And if possible, could you please help me check the following information on the Deco APP:

1. the IP settings on the IPV4 page, like internet IP address, DNS server;

2. the LAN IP address on the Deco;

-if there is any conflict, Deco would change its LAN IP address;

 

For more details, please have a look at this link: https://community.tp-link.com/en/home/forum/topic/203366?replyId=586262 

Thank you very much and wait for your reply.

Recommended Solution
  0  
  0  
#3
Options